Free Metalworking Project Plans: Knurling Tool Attachment for the Taig Lathe

Material: Steel

Units: (in)

Nick Carter of CarterTools has a set of plans for a Knurling Tool he designed specifically for his Taig Lathe. So if you are a Taig Lathe owner, you might want to consider building Nick’s Knurling Tool rather than modifying Ken’s Knurling Tool that was posted last week.

I’ve provided a PDF copy of the plans below, but you can also visit Nick’s site to see the original plans here.

CarterTools has lots of great resources for the Taig Lathe and Mill, so be sure to check it out if you’re a Taig owner.

Thanks Nick for letting me share your Knurling Tool plans with my visitors!

  Knurling_Tool_Attachment_for_Taig_Lathe.pdf (500.1 KiB, 666 hits)
NOTE: You need to be a registered member (and logged in) to download this file. You can register or log in using the "Log In" section located in the upper left corner of the site (don't worry, it's free to register and your email address will be kept private). Please note, subscribing to the RSS feed is not the same as registering. Also, registering for the site will grant you forum access, allowing you to log into the forum using the same username and password you used to register for the site.

To leave a comment join the forum discussion on this post

Tags: Intermediate, Mill, Units (in)

This entry was posted on Tuesday, April 21st, 2009 at 7:45 AM and is filed under Mill Projects. You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.