Thursday , July 24 2014
Recent Articles
Home > Tag Archives: Upgrades

Tag Archives: Upgrades

Making an index wheel for the G0602

P1000166

Several years ago I made an index wheel for my G0602.  At the time I was building a modified Brooks cutter/grinder and had a number of calibrated dials and knobs to make.  I never wrote up the index wheel project. However, the index wheel has appeared in many photos that were incorporated into other posts that I made and as ... Read More »

Making a G0602 Cross Slide Retractor

1 - Retracting tool holder, design by George Thomas.

In this metalworking project Jim walks us through the steps required to build a handy cross slide retractor for the lathe. This modification simplifies the threading process by allowing the user to quickly retract the threading tool away from the part with a lever rather than by using the cross feed dial. It's also useful when making finish passes as the tool can be retracted prior to moving the carriage (thus your tool doesn't drag across the finished surface). The dimensions in the free drawings for this modification are for the popular G0602 10x22 lathe by Grizzly, but the drawings can be easily modified to fit the dimensions of other lathes. Read More »